Cutting Ti-6Al-4V and other titanium grades
| Operation | SFM (Carbide) | Feed per tooth | DOC |
|---|---|---|---|
| Rough Milling | 100-150 | 0.05-0.12mm | 1-5mm |
| Finish Milling | 150-200 | 0.03-0.08mm | 0.2-0.5mm |
| Turning (Rough) | 120-180 | 0.15-0.3mm/rev | 1-4mm |
| Drilling | 60-100 | 0.03-0.08mm/rev | - |
Use high-pressure coolant (40-70 bar) directed at cutting zone. Never stop feeding in cut. Maintain constant chip load.