Producing hollow plastic parts through rotational molding
| Material | Oven Temp | Typical Use |
|---|---|---|
| LLDPE | 260-300C | Tanks, containers |
| Nylon 6 | 290-320C | Fuel tanks |
| PVC Plastisol | 200-230C | Soft parts, toys |
Oven heat time: 15-30 min. Oven temp: 260-320C. Cooling: 15-30 min (air first, then water). Rotation speed: 2-8 RPM. Wall thickness: 3-15mm typical.