TCVN 2219:1977 — System for design documentation. Rules of making construction drawings of cylindrical gears of Novikov transmissions with two paths of contact
TCVN 2219:1977 is a Vietnamese national standard (Tiêu chuẩn Việt Nam), issued by the Directorate for Standards, Metrology and Quality (STAMEQ). It is recorded in our database with 5 corresponding Chinese standards. This page lists the correspondence so a Chinese supplier or an importer can see what the destination market requires before a shipment is made.
Standard record
| Field | Value |
|---|---|
| Standard number | TCVN 2219:1977 |
| Issuing body | TCVN |
| Country | Vietnam |
| Title (English) | System for design documentation. Rules of making construction drawings of cylindrical gears of Novikov transmissions with two paths of contact |
| ICS category | 15 |
Corresponding Chinese standards
| Chinese standard | Title | Match |
|---|---|---|
| GB/T 1356-2001 | Basic rack tooth profile for involute cylindrical gears | D |
| GB/T 10095.1-2008 | Cylindrical gears - System of accuracy - Part 1 | D |
| GB/T 19936.3-2025 | 齿轮 FZG试验程序 第3部分：半流体齿轮润滑脂的相对胶合承载能力和磨损特性FZG试验方法A/2.8/50 | D |
| GB/T 3481.1-2025 | 齿轮 轮齿的磨损和损伤 第1部分：术语和特性 | D |
| GB/T 17879-2023 | 齿轮 磨削后表面回火的化学浸蚀检验 | D |
Match levels show how close each correspondence is. A means the object and the test or classification method both match, so the two documents are usually interchangeable for procurement. B and C are probable matches that must be checked clause by clause. D means only the general ICS category matches, so the documents address different subjects. E means no equivalent was found. A cross-reference is a research aid, not a legal equivalence.
Other TCVN standards in the same category
| Standard | Title |
|---|---|
| TCVN 12131:2017 | Calculation of load capacity of spur and helical gears - Application f |
| TCVN 12133:2017 | Bevel gears - ISO system of accuracy |
| TCVN 7578-1:2017 | Calculation of load capacity of spur and helical gears - Part 1: Basic |
| TCVN 7578-5:2017 | Calculation of load capacity of spur and helical gears - Part 5: Stren |
| TCVN 2258:2009 | Involute cylindrical gear drive. Basic profiles |
| TCVN 13:2008 | Technical drawings. Conventional representation of gears |
| TCVN 7577-1:2007 | Cylindrical gears – ISO system of accuracy – Part 1: Definitions and a |
| TCVN 7578-6:2007 | Calculation of load capacity of spur and helical gears. Part 6: Calcul |
Other TCVN standards
Next steps
Tariff and rules of origin
Whether duty applies on import from China and what a Form E certificate of origin would save under the China–ASEAN Free Trade Area.
Logistics and landed cost
Route options from inland China to this market, including the Pinglu Canal.
Find a Chinese supplier
Manufacturers able to produce to this standard.
Other ASEAN standards
Browse by country, category or Chinese equivalent.
A test report against TCVN 2219:1977 is normally required at import into Vietnam. Accredited laboratories can issue one — contact us for a referral, or ask your supplier whether they already hold a current report.
Standard record compiled from the national standards body and translated into plain English. Cross-references generated by comparing scope, object and test-method terms. Last compiled 2026-10-09.