TCVN 2294:1978 — Heat treatment of metals. General safety requirements
TCVN 2294:1978 is a Vietnamese national standard (Tiêu chuẩn Việt Nam), issued by the Directorate for Standards, Metrology and Quality (STAMEQ). It is recorded in our database with 5 corresponding Chinese standards. This page lists the correspondence so a Chinese supplier or an importer can see what the destination market requires before a shipment is made.
Standard record
| Field | Value |
|---|---|
| Standard number | TCVN 2294:1978 |
| Issuing body | TCVN |
| Country | Vietnam |
| Title (English) | Heat treatment of metals. General safety requirements |
| ICS category | 30 |
Corresponding Chinese standards
| Chinese standard | Title | Match |
|---|---|---|
| GB/T 45983 | 稀土化学热处理 第1部分：渗碳及碳氮共渗 | D |
| GB/T 22561-2008 | 钢件的真空热处理 | D |
| GB/T 13324-2006 | 热处理设备 术语 | D |
| GB/T 38805-2020 | 重载齿轮热处理技术要求 | D |
| GB/T 42083-2022 | 4Cr5MoSiV1热作模具钢件的热处理 | D |
Match levels show how close each correspondence is. A means the object and the test or classification method both match, so the two documents are usually interchangeable for procurement. B and C are probable matches that must be checked clause by clause. D means only the general ICS category matches, so the documents address different subjects. E means no equivalent was found. A cross-reference is a research aid, not a legal equivalence.
Other TCVN standards in the same category
| Standard | Title |
|---|---|
| TCVN 7049:2020 | Heat-treated meat |
| TCVN 7050:2020 | Non-heat treated meat |
| TCVN 11957-1:2017 | Textiles – Effect of dry heat on fabrics under low pressure – Part 1: |
| TCVN 12142-1:2017 | Heat treatable steels, alloy steels and free-cutting steels - Part 1: |
| TCVN 12142-14:2017 | Heat treatable steels, alloy steels and free-cutting steels - Part 14: |
| TCVN 12142-15:2017 | Heat treatable steels, alloy steels and free-cutting steels - Part 15: |
| TCVN 12142-17:2017 | Heat treatable steels, alloy steels and free-cutting steels - Part 17: |
| TCVN 12142-18:2017 | Heat treatable steels, alloy steels and free-cutting steels - Part 1: |
Other TCVN standards
Next steps
Tariff and rules of origin
Whether duty applies on import from China and what a Form E certificate of origin would save under the China–ASEAN Free Trade Area.
Logistics and landed cost
Route options from inland China to this market, including the Pinglu Canal.
Find a Chinese supplier
Manufacturers able to produce to this standard.
Other ASEAN standards
Browse by country, category or Chinese equivalent.
A test report against TCVN 2294:1978 is normally required at import into Vietnam. Accredited laboratories can issue one — contact us for a referral, or ask your supplier whether they already hold a current report.
Standard record compiled from the national standards body and translated into plain English. Cross-references generated by comparing scope, object and test-method terms. Last compiled 2026-10-09.