首页›标准库›TCVN 2338:1978 — Pulleys for driving V-b
Home › Standards › Vietnam › TCVN 2338:1978

TCVN 2338:1978 — Pulleys for driving V-belts with spokes and boss protruded from one and shortened from the other rim face - Basic dimensions

TCVN 2338:1978 is a Vietnamese national standard (Tiêu chuẩn Việt Nam), issued by the Directorate for Standards, Metrology and Quality (STAMEQ). It is recorded in our database with 2 corresponding Chinese standards. This page lists the correspondence so a Chinese supplier or an importer can see what the destination market requires before a shipment is made.

Standard record

FieldValue
Standard numberTCVN 2338:1978
Issuing bodyTCVN
CountryVietnam
Title (English)Pulleys for driving V-belts with spokes and boss protruded from one and shortened from the other rim face - Basic dimensions
ICS category16

Corresponding Chinese standards

Chinese standardTitleMatch
GB/T 11357-2020Synchronous belt drives - BeltsD
GB/T 11361-2020Synchronous belt drives - PulleysD

Match levels show how close each correspondence is. A means the object and the test or classification method both match, so the two documents are usually interchangeable for procurement. B and C are probable matches that must be checked clause by clause. D means only the general ICS category matches, so the documents address different subjects. E means no equivalent was found. A cross-reference is a research aid, not a legal equivalence.

Other TCVN standards in the same category

StandardTitle
TCVN 12517:2018Steel wire rope net panels and rolls - Definitions and specifications
TCVN 12172:2017Safety of woodworking machines -- Edge-banding machines fed by chain(s
TCVN 7647:2016Rubber, vulcanized – Determination of adhesion to wire cord
TCVN 10837:2015Cranes -- Wire ropes -- Care and maintenance, inspection and discard
TCVN 11078:2015Cranes and hoists -- Selection of wire ropes, drums and sheaves
TCVN 8855-1:2011Cranes and lifting appliances. Selection of wire ropes. Part 1: Genera
TCVN 8855-2:2011Cranes and lifting appliances. Selection of wire ropes. Part 2: Mobile
TCVN 3782:2009Round drawn wire for general purpose non-alloy steel wire ropes and fo

Other TCVN standards

TCVN 10544-1:2026TCVN 10544-2:2026TCVN 10739:2026TCVN 11820-1:2026TCVN 11820-2:2026TCVN 11892-1:2026TCVN 12194-2-9:2026TCVN 12195-2-19:2026TCVN 12709-2-32:2026TCVN 12709-2-33:2026TCVN 12884-1:2026TCVN 12884-2:2026TCVN 13256:2026TCVN 13381-10:2026TCVN 13381-11:2026TCVN 13381-12:2026TCVN 13381-2:2026TCVN 13381-7:2026TCVN 13381-8:2026TCVN 13381-9:2026TCVN 13382-10:2026TCVN 13382-11:2026TCVN 13382-12:2026TCVN 13382-13:2026TCVN 13382-14:2026TCVN 13382-15:2026TCVN 13382-16:2026TCVN 13382-17:2026TCVN 13382-18:2026TCVN 13382-19:2026TCVN 13382-2:2026TCVN 13382-20:2026TCVN 13382-21:2026TCVN 13382-22:2026TCVN 13382-7:2026TCVN 13382-8:2026TCVN 13382-9:2026TCVN 13474-4:2026TCVN 13474-5:2026TCVN 13474-6:2026

Next steps

Tariff and rules of origin

Whether duty applies on import from China and what a Form E certificate of origin would save under the China–ASEAN Free Trade Area.

Logistics and landed cost

Route options from inland China to this market, including the Pinglu Canal.

Find a Chinese supplier

Manufacturers able to produce to this standard.

Other ASEAN standards

Browse by country, category or Chinese equivalent.

Certification
A test report against TCVN 2338:1978 is normally required at import into Vietnam. Accredited laboratories can issue one — contact us for a referral, or ask your supplier whether they already hold a current report.
Source
Standard record compiled from the national standards body and translated into plain English. Cross-references generated by comparing scope, object and test-method terms. Last compiled 2026-10-09.