TCVN 2416:1978 — Tube connections for hydraulic, pneumatic and lubrication systems - End reduce tees for Pn 40 MN/m2 (~400 KG/cm2) - Construction and basic dimensions
TCVN 2416:1978 is a Vietnamese national standard (Tiêu chuẩn Việt Nam), issued by the Directorate for Standards, Metrology and Quality (STAMEQ). It is recorded in our database with 5 corresponding Chinese standards. This page lists the correspondence so a Chinese supplier or an importer can see what the destination market requires before a shipment is made.
Standard record
| Field | Value |
|---|---|
| Standard number | TCVN 2416:1978 |
| Issuing body | TCVN |
| Country | Vietnam |
| Title (English) | Tube connections for hydraulic, pneumatic and lubrication systems - End reduce tees for Pn 40 MN/m2 (~400 KG/cm2) - Construction and basic dimensions |
| ICS category | 18 |
Corresponding Chinese standards
| Chinese standard | Title | Match |
|---|---|---|
| GB/T 12771-2019 | Stainless steel welded pipes | D |
| GB/T 44557-2024 | 制冷系统及热泵 挠性管道元件和非金属管件 要求和分类 | D |
| GB/T 28799.4-2024 | 冷热水用耐热聚乙烯（PE-RT）管道系统 第4部分：阀门 | D |
| GB/T 46554-2025 | 石油天然气工业 管道输送系统 机械连接件试验程序 | D |
| GB/T 46775-2025 | 石油天然气工业 管道输送系统 螺纹连接件试验程序 | D |
Match levels show how close each correspondence is. A means the object and the test or classification method both match, so the two documents are usually interchangeable for procurement. B and C are probable matches that must be checked clause by clause. D means only the general ICS category matches, so the documents address different subjects. E means no equivalent was found. A cross-reference is a research aid, not a legal equivalence.
Other TCVN standards in the same category
| Standard | Title |
|---|---|
| TCVN 14405:2025 | Standard test method for determining the concentration of pipeline dra |
| TCVN 9246:2024 | Steel pipe sheet piles |
| TCVN 13580:2023 | Ventilation and air conditioning – Requirements for duct manufacture |
| TCVN 13581:2023 | Ventilation and air conditioning – Requirements for duct installation |
| TCVN 13794:2023 | Rubber hoses and hose assemblies − Wire-braid-reinforced hydraulic typ |
| TCVN 13795:2023 | Rubber hose and hose assemblies for oil suction and discharge service |
| TCVN 13796:2023 | Rubber hoses and hose assemblies − Textile-reinforced hydraulic types |
| TCVN 13797:2023 | Rubber hoses and hose assemblies for saturated steam − Specification |
Other TCVN standards
Next steps
Tariff and rules of origin
Whether duty applies on import from China and what a Form E certificate of origin would save under the China–ASEAN Free Trade Area.
Logistics and landed cost
Route options from inland China to this market, including the Pinglu Canal.
Find a Chinese supplier
Manufacturers able to produce to this standard.
Other ASEAN standards
Browse by country, category or Chinese equivalent.
A test report against TCVN 2416:1978 is normally required at import into Vietnam. Accredited laboratories can issue one — contact us for a referral, or ask your supplier whether they already hold a current report.
Standard record compiled from the national standards body and translated into plain English. Cross-references generated by comparing scope, object and test-method terms. Last compiled 2026-10-09.