TCVN 3592:1981 — Woodworking lathers - Basic parameters and dimensions
TCVN 3592:1981 is a Vietnamese national standard (Tiêu chuẩn Việt Nam), issued by the Directorate for Standards, Metrology and Quality (STAMEQ). It is recorded in our database with 5 corresponding Chinese standards. This page lists the correspondence so a Chinese supplier or an importer can see what the destination market requires before a shipment is made.
Standard record
| Field | Value |
|---|---|
| Standard number | TCVN 3592:1981 |
| Issuing body | TCVN |
| Country | Vietnam |
| Title (English) | Woodworking lathers - Basic parameters and dimensions |
| ICS category | 25 |
Corresponding Chinese standards
| Chinese standard | Title | Match |
|---|---|---|
| GB/T 6477-2008 | 金属切削机床 术语 | D |
| GB/T 4133-2025 | 机床 莫氏圆锥强制传动 | D |
| GB/T 21013-2025 | 机床 紧固平砂轮用砂轮卡盘 | D |
| GB/T 14896.2-2025 | 特种加工机床 术语 第2部分：电火花加工机床 | D |
| GB/T 14896.8-2025 | 特种加工机床 术语 第8部分：电弧加工机床 | D |
Match levels show how close each correspondence is. A means the object and the test or classification method both match, so the two documents are usually interchangeable for procurement. B and C are probable matches that must be checked clause by clause. D means only the general ICS category matches, so the documents address different subjects. E means no equivalent was found. A cross-reference is a research aid, not a legal equivalence.
Other TCVN standards in the same category
| Standard | Title |
|---|---|
| TCVN 10170-1:2025 | Test conditions for machining centres Part 1: Geometric tests for mac |
| TCVN 10170-6:2025 | Test conditions for machining centres Part 6: Accuracy of speeds and |
| TCVN 10170-7:2025 | Test conditions for machining centres − Part 7: Accuracy of finished t |
| TCVN 14305:2025 | Additive manufacturing – General principles – Fundamentals and vocabul |
| TCVN 14306:2025 | Additive manufacturing – General principles – Requirements for purchas |
| TCVN 14307-1:2025 | Additive manufacturing – Material extrusion-based additive manufacturi |
| TCVN 14307-2:2025 | Additive manufacturing – Material extrusion-based additive manufacturi |
| TCVN 14308:2025 | Additive manufacturing – Process characteristics and performance – Pra |
Other TCVN standards
Next steps
Tariff and rules of origin
Whether duty applies on import from China and what a Form E certificate of origin would save under the China–ASEAN Free Trade Area.
Logistics and landed cost
Route options from inland China to this market, including the Pinglu Canal.
Find a Chinese supplier
Manufacturers able to produce to this standard.
Other ASEAN standards
Browse by country, category or Chinese equivalent.
A test report against TCVN 3592:1981 is normally required at import into Vietnam. Accredited laboratories can issue one — contact us for a referral, or ask your supplier whether they already hold a current report.
Standard record compiled from the national standards body and translated into plain English. Cross-references generated by comparing scope, object and test-method terms. Last compiled 2026-10-09.